Differences

This shows you the differences between two versions of the page.

--- en:resources:3dprints [2023/01/25 10:47] – m-gamperl
+++ en:resources:3dprints [2023/07/12 14:29] (current) – m-gamperl
@@ Line 1: / Line 1: @@
 ===== 3D Printing Files =====
-Description file type, how to change etc. Open source!
+The following files are .stl files which are editable using 3D editors, or can be printed as they are.
 ==== Measurement Node ====
@@ Line 8: / Line 8: @@
   * Housing for the LoRa Node \\ {{lora-node-housing_big.stl|lora node housing}}
-  * Lid Mount for LoRa Node inside the housing (adapted to xxxx housing) - three versions for (1) battery powered, (2) solar powered, and (3) relay version \\ {{lid-mount-batterie-v3.stl|battery version}} \\ {{lid-mount-solar-v2_new_charger_pcb_.stl|solar version}} \\ {{lid_mount_relay.stl|relay version}}
+  * Lid Mount for LoRa Node inside the housing  - three versions for (1) battery powered, (2) solar powered, and (3) relay version \\ {{lid-mount-batterie-v3.stl|battery version}} \\ {{lid-mount-solar-v2_new_charger_pcb_.stl|solar version}} \\ {{lid_mount_relay.stl|relay version}}
   * Mount for SCL3300 onto the PCB (bottom, middle and top part) \\ {{scl3300_pcb_mount_p1_v4_bottom_part.stl|bottom part}} \\ {{scl3300_pcb_mount_p2_v3_middle_part.stl|middle part}} \\ {{scl3300_pcb_mount_p3_v2_top_part.stl|top part}}